Limited 5 years / 35,000 hours (whichever comes first) Parts and Labor*
*Warranty: Please see the detailed Product Warranty page. The Illumination Module and Optical Module have different coverage periods and Lifed Items warranty.
Three active matrix 0.69" digital D-ILA devices
20,000:1 Native Contrast (Typical)
Non-Motion
1200 Lumens (Typical)
12-bit gamma correction
Long-life light source (20,000+ hours) for lower total cost of ownership
Night Vision Compatible : Stimulated IR
6-axis colour management system
Weight 31.8 lbs / 14.4 kg
Dimensions (WxHxD) 17.7” x 7.2” x 18.8” / 450 mm x 181 mm x 476 mm
DLA-VS2600FTD - Visualization Series D-ILA Projector
Technical Specials
Safety and Environmental Impact Moving from a lamp-based projector to a solid state light source means that there is no longer the mercury in the lamp to worry about, eliminating any disposal concerns. Since the projector contains a laser source, JVC has taken special care to be sure no laser light can escape the projector housing. This is facilitated by the strong die-cast block that holds the blues lasers. This is good for thermal management and allows the projector to have a Class II laser classification. This means you follow the same safety considerations as you would with a lamp based projector.
Flexible Mounting Orientations Compared with conventional lamp projectors with a tilt angle limitation, BLU-Escent projectors have no limitations on orientation or tilt angle. They can be installed at any orientation through 360-degrees and even vertically, which is ideal for helicopter simulators which require higher vertical resolution. The rotation of the phosphor wheel remains unaffected regardless of the install angle.
Very High Contrast and Dynamic Range The JVC BLU-Escent projectors offer very high contrast and dynamic range. For simulators, that can be the difference between usable and unusable. For example, one key application is landing in fog or low light levels where pilots key on seeing runways or other lights to aid in landing. If the contrast is not high enough, the pilots cannot distinguish the lights from the background, making it difficult to see the landing lights in a CAT III scenario, compromising the simulation. The high dynamic range allows the lights to punch through the fog, giving a realistic, calligraphic like image.
The BLU-Escent DLA-VS2600 offers 4096 x 2160 resolution panels. The subframes are projected sequentially, optically shifted ½ pixel in both horizontal and vertical directions, alternating at a rate of 120Hz for 30Hz or 60Hz content. The viewer’s eyes blend the A & B subframes together to create an enhanced resolution image. This image gives less jaggy edges, round circles and circular light points and reduces anti-aliasing.
Native 4K logo
Image Devices
Projection Technology
D-ILA
D-ILA Technology
Yes
Projection Device size
0.69 inch
Number of Projection Devices
3
Native Resolution
4096 by 2160 Pixels
Electronic E-Shift Generation
Max Resolution
4096 by 2160 Pixels
Polarize Light Output
Light-Source
Light source technology
Laser / Posphor
BLU-Escent technology
Yes
Type of the Light source
Number of Light sources
1 unit
Expecting Lifetime regular mode
Expecting Lifetime save mode
Phosphor Wheel
Light and Contrast
Brightness Typical [1]
1200 ANSI Lumen
Brightness Minimum
1 ANSI Lumens
Contrast Typical
20000 to 1
Contrast Minimum
1 to 1
Uniformity
greater than 80%
Aperture
by Lens see Lens data
Dynamic Light Power Control
Yes
Manual Light Power Control
125 steps
Color Bit depth
8bit 10bit or 12 bit
Color Space
sRGB 100%
Lens
Model Name
No Lens
Lens included
No
Focus/Zoom Adjustment on internal Test Patterns
Yes
Focus/Zoom Adjustment on User Signal
Yes
Functions
Picture Mode Presets
Natural / Dynamic and 6 User settings
Color Temperature
5500K / 6500K / 9500K / High Bright / 3 User settings
Gamma adjust
Std 2.2 Gamma and 3 User adjustable Gamma presets
Gamma Processing Depth
12 Bit
Manual Gamma Settings
Yes
E-Shift Control
Color Management
Clear Motion Drive
OFF / black insertion at low level / black insertion / pulsed laser
Pixel Adjustment Whole Screen
Yes
Pixel Adjustment Zone Screen
Yes
Auto Calibration
external optional Software Tool
Screen Mask
Start up Logo
Yes
Input Channel Hide
HDMI1 / HDM2 / Off
General Hide Mode
Yes
Internal Test Patterns
YES
Standby Timer
Off / 1 Hour / 2 Hours / 3 Hours and 4 Hours
Projector System Status Screen
Yes
Local Projector Control Buttons
Yes
Menu Position select
Yes
Black/Blue Screen select (in case of no Input source)
