DLA-SH7NL High-brightness 4K Visualization Series Projector (without lens) • JVC Europe

High-brightness 4K Visualization Series Projector (without lens)

DLA-SH7NL

Picture (2)
Manuals

Optional lens available / 1.27-inch Native 4K 4096 x 2400 D-ILA Devices(x3) / Delivers 5000 lumens / Dual lamp UHP light source/ High Native contrast of 10,000:1

Features

Native 4K (4096x2400) D-ILA device x3
Dual lamp UHP light source
5000lm brightness
Four dual-link DVI input terminals enable simultaneous multi-screen display (two or four display mode)
Used in Flight-Simulators / Planetariums and Research and Development Centers
Flexible mounting in the projection axis up to plus/minus 90°
Centralized Optic
High native contrast ratio of 10,000:1
Optional graphics interface for color management
Optional lenses

Optional Mechanical Shutter for special Smear Reductions
Dimensions (WxHxD) 25-31/32 x 13-15/32 to 14-1/4 x 30-13/16 inch / 660 x 342 to 362 x 783 mm
Weight 111.1 lbs / 50.5 kg

Technical Specifications
Accessories
Product Support

Technical Specifications

DLA-SH7NL - High-brightness 4K Visualization Series Projector (without lens)

Technical Specials

The DLA-SH7NLG is an advanced 4K2K projector incorporating three 1.27-inch 4K2K D-ILA display devices. It produces extremely high-quality images for use in planetariums, museums, simulators, and medical institutions, as well as high-spec design and monitoring facilities. Its dual ultra-high-pressure mercury lamps and wire grid optical system produce 5,000 ANSI lumens of brightness and offer a stunning 10,000:1 native contrast ratio. Combining superb definition and resolution with low-cost maintenance, the DLA-SH7NLG achieves ultra-high resolution of approximately 10 megapixels (4,096 x 2,400), which is five times the resolution of full HD.

The projector can simultaneously display two or four screens in WUXGA (1,920 x 1,200) resolution. Multi-screen projection is facilitated by four DVI (Dual-Link) input terminals supporting an array of PC input formats. The DLA-SH7NLG also offers a low latency mode for simulation environments.

The DLA-SH7NLG has both dual and single lamp modes. When in the single lamp mode, the projector automatically chooses the lamp with less cumulative operating time for maintenance efficiency. This, plus the addition of a low-power mode, enables lamp life of approximately 3,000 hours, which is about double that of conventional projectors. Such features allow the DLA-SH7NLG to offer low running costs even under heavy professional use.

The DLA-SH7NLG operates on normal AC 100-220V power and consumes less than 1.1 kW. Convergence is adjustable to 1/10 pixel accuracy via GUI control; three gamma tables are included. Six test patterns, including a crosshatch and color bars, enable image adjustment without external signal sources. Projection configuration data is easily stored and uploaded from a USB memory device. The Ethernet-compatible DLA-SH7NLG can be configured via a PC Web browser, and multiple projectors are networkable for operation via a single PC. Plus, for improved maintenance, e-mails can be generated automatically to send lamp replacement reminders and error status notifications.

Its well though-out design offers operational flexibility, including the ability to stack two projectors for passive 3D images or installation on a ±90-degree tilt.

Image Devices

Projection Technology: D-ILA

D-ILA Technology: Yes

Projection Device size: 1.27 inch

Number of Projection Devices: 3

Native Resolution: 4096 by 2400 Pixels

Max Resolution: 4096 by 2400 Pixels

Polarize Light Output: YES S/P/S

Light-Source

Light source technology: Ultra-High Pressure Mercury Lamp 330Watt

Type of the Light source: PK-L3310 1 Unit (need 2)

Number of Light sources: 2 unit

Expecting Lifetime regular mode: 2000 hours at Dual 100%

Expecting Lifetime save mode: 3000 hours at Dual 80%
you can extent by using one light source only

Light and Contrast

Brightness Typical ^[1]: 5000 ANSI Lumen

Brightness Minimum: 4000 ANSI Lumens

Contrast Typical: 10000 to 1

Contrast Minimum: 8000 to 1

Uniformity: greater than 85%

Manual Light Power Control: 2 Steps 100%/80%

Dual Light Control (in case of Dual Light source): Yes

Color Bit depth: 8-bit via single link DVI
12-bit maximum via dual link DVI

Lens

Exchangeable Lens: Yes

Lens included: NO

Support of external Mechanical Shutters: Yes electrical control out put

Functions

Color Temperature: 6500 and User mode,

Gamma adjust: Std 2.2, 1.8 and 2.6 Gamma

Manual Gamma Settings: With dedicate Service Software

Shading adjustment: With dedicate Service Software

Color Management: Only with optional Hardware

Pixel Adjustment Whole Screen: YES

Other Calibration Tools: Manual by Service software

General Hide Mode: YES

Internal Test Patterns: YES

Projector System Status Screen: Yes

Black/Blue Screen select (in case of no Input source): Yes

Operation Control by Web-Interface (Internet-Browser): Yes

Input Signal

HDMI Input Signal

DVI Input Signal: 2048 x 1200 max per Channel, max Resolution 4096 x 2400 from Dual or Quad Input

Note for Signal Input combinations:: Please study for details the User manual (download) or dedicate Input format list, when available.

Signal Input combination SINGLE: DVi 1 640 x 480 to 2048 x 1200 max. Image up-scale to 4096 x 2400, other resolutions like 3840x2160 also possible according to the input source

Signal Input combination DUAL Stripes: DVI 1 and DVI 3 each 2048 x 2400 = 4096 x 2400
also 4096 x 2160 / 3840 x 2400 / 3840 x 2160 related to the input resolution

Signal Input combination QUAD -Stripes: DVI 1 to DVI 4 each 1024x2400 = 4096x2400
also 4096 x 2160 / 3840 x 2400 / 3840 x 2160 related to the input resolution

Signal Input combination QUAD Cross: DVI 1 to DVI 4 each 2048 x 1200 = 4096x2400
also 4096 x 2160 / 3840 x 2400 / 3840 x 2160 related to the input resolution

3D Format

3D Capability: Yes

3D Special Notes:: Passive with 2 Projectors (polarized circular filters needed)

Image Timing Data

Latency for Simulation or Video Lip sync in ms.: <10ms @ 4-stripe mode

Input Terminals

DVI: YES 4 Ports

RS-232C Terminal: Yes

LAN Terminal: Yes

USB Service Terminal: Type A for service only

Control Terminals

RS-232C Terminal: Yes

LAN Terminal: Yes, RJ45

Power and Environment

Noise Level (0-26 degree): <39dB (A) at 39.4”/1m (3.3ft)

Power Requirement: AC 100-240V, 50/60Hz

Power Consumption: 1100 Watts

Power Standby: 6W

Operation Temperature: 10°C to 35°C

Operation Humidity:(Non-Condensing): 20% to 80%

Storage Temperature: -5°C to 60°C

Installation Height: below 2000 Meters

Installation Angle: Vertical ±90 degrees, Horizontal ±5 degrees

Dimensions: W 663 x H 362 x D 793 mm

Weight: 50.5 kg

Airflow requirement: 3 m3 per minute minimum IN/OUT Take

Calorific Value: 3,960kJ/h (946kcal/h)

High Altitude Mode: ON/OFF need to set to ON over 1500 Meter

Motion Platform usable: Yes please contact us for Force-Data

Include Package

Cord A: US AC

Cord B: EU AC

Others: Safety Info Doc include for Full Instruction, please download form this web site

General Editing Note

General Note:: Simulated pictures.The values for weight and dimensions are approximate.E.&O.E. Design and specifications subject to change without notice.

[1] typical @High bright mode

Accessories

Product Support

DLA-SH7NL - High-brightness 4K Visualization Series Projector (without lens)

Others

DLA-SH7NL_leaflet.pdf

Brochure

362.34 kb

Download

Application & Firmware

Caution Sheet (English)	https://manuals.jvckenwood.com/download/files/LCT2689-009A.pdf	217.1KB
Caution Sheet (English, Japanese)	https://manuals.jvckenwood.com/download/files/LCT2689-004B.pdf	123.9KB
Caution Sheet (English, Japanese)	https://manuals.jvckenwood.com/download/files/LCT2689-005B.pdf	342.8KB
FOSS Sheet (English)	https://manuals.jvckenwood.com/download/files/LCT2689-008A.pdf	67.0KB
Operation Manual (English)	https://manuals.jvckenwood.com/download/files/LCT2370-003F.pdf	3.3MB