The connection to a network will be made by the USB Host Port of the camcorder (on the right back end side of the camcorder). Please select the device which you are going to use: WIFI dongle / 3G/4G dongle or a CAT Network adapter.The Adapter you going to be use must be a registered Adapter (see attached compatible list), cause all of these Adapter needs dedicate drivers, which to be implemented into the camcorder.In the case for LTE adapters, there must be done a pre-set of these dongles in your local PC first!
Overlay for Broadcast-News
Self Modify Templates via SDP Generator
Overlay output selection
Yes, REC / LIVE / STREAM
Yes, 3G HDSDI
OUT HDSDI Format max.
1080/60p,50p 10 Bit 4:2:2 EE
OUT HDMI Format max.
Yes, 3.5mm mini jack
OUT Audio Headphone
Yes, 1 times 3.5mm mini jack
IN Audio XLR MIC/LINE
Yes, 2 CH with +48 V Mic and Line support
Time code IN/OUT
Wired remote IN
Yes, serial LANC 2.5mm mini jack
SSD Caddy Support
EVF and LCD
Operation Panel Type
Operation Panel Resolution
WVGA (800 x 480), 800 x 450 at 16:9
Operation Panel Size diagonal in inch
Electronic Viewfinder (EVF) Type
Electronic Viewfinder (EVF) Resolution
Quad VGA (1280 x 960), 1280 x 720 at 16:9
Electronic Viewfinder (EVF) Size diagonal in inch
Power and Enviroment Spec´s
Yes, DV12V(AC Adapter)
Yes, 7,2 Volt Battery BN-VC264
Weight in kg
Measurements (WxHxD) in mm
W 195 x H 230 x D 445
Yes, AC Adapter
Yes, Power cord
Yes, Wireless Antennas 2x, Lens Cap
General Editing Note
Simulated pictures.The values for weight and dimensions are approximate.E.&O.E. Design and specifications subject to change without notice.
WLAN (WIFI) and Ethernet USB Adapter list , Please Note: Sometimes the Adapter manufacturer change the revision, without changing the product name, may such an adapter will not work, we are sorry for this behaviors.
3G/4G/LTE Adapter List and Hints, please note for European customers we recommend to use the Universal adapter, but please read the notes too.